Skip to main content
FixMyTech

Printer Says Offline But It Is Connected and On

By

Published

8 min read

Share

Short answer

"Offline" means Windows could not reach the printer when it last tried, not that the printer reported anything. Clear the stuck print queue first — Settings → Bluetooth & devices → Printers & scanners → your printer → Open print queue → cancel everything — then turn the printer off and on. If it returns, the printer's IP address has changed and needs to be fixed on the router.

On this page

“Offline” is not a message from the printer. It is Windows reporting that the last time it tried to reach the printer, nothing answered. The printer may be perfectly healthy, powered, connected to Wi-Fi and showing a ready screen, and Windows will still say offline because it is looking in the wrong place.

That distinction matters, because it means the fix is almost never on the printer.

Which of the three causes is yours

Clue Cause Fix
Jobs stuck in the queue, nothing prints Wedged spooler or stuck job Clear the queue
Goes offline every few days, works after a restart IP address changed Pin the address
Offline since a Windows update Driver or port changed Reinstall the printer

A quick test that separates them: can your phone print to it? If the phone prints fine, the printer and the network are healthy and the problem is entirely on the PC side. That alone rules out most of what people try.

Clear the queue and the flag

Do these in order. They take three minutes and resolve a large share of cases.

Cancel everything in the queue. Settings → Bluetooth & devices → Printers & scanners → click your printer → Open print queue. Select all jobs and cancel them. A single corrupt job at the front blocks everything behind it, and Windows marks the whole printer offline as a consequence.

Untick Use Printer Offline. In that same queue window, open the Printer menu and check whether Use Printer Offline is ticked. It can be set accidentally and it does exactly what it says: queue, do not send. On Windows 11 24H2 this setting is reached through the queue window rather than Settings.

Power cycle properly. Turn the printer off at its own power button, unplug it from the wall for 30 seconds, plug it back in and wait for it to finish starting — typically 30–60 seconds for a laser printer. Pulling power rather than just pressing the button clears the printer’s internal network state, which a soft restart does not.

Restart the Print Spooler if jobs will not cancel. Press Win+R, type services.msc, find Print Spooler, right-click → Restart. This clears pending jobs for every printer on the machine, so check nothing important is waiting.

The address moved

If the printer goes offline every few days and a restart of everything fixes it temporarily, this is your cause, and nothing else will stop it recurring.

Your router hands out IP addresses on a lease. When the lease expires, the router restarts, or the printer sleeps long enough to drop off, it can come back with a different address. Windows stored the old one in a printer port and keeps sending jobs there.

Find the printer’s current address. Print a network configuration page from the printer’s own menu — on most models it is under Settings, Network, or Reports. It prints the IPv4 address, something like 192.168.1.45.

Then pin it so it cannot change. Two routes, either is fine:

  • On the printer: in its network menu, switch IPv4 configuration from automatic to manual and set an address outside the router’s DHCP pool. Most home routers hand out .100 upwards, so .50 is usually safe.
  • On the router: find the DHCP reservation or static lease section, and bind the printer’s MAC address to a fixed IP. This is the tidier option because everything stays in one place.

Then point Windows at it. Settings → Printers & scanners → your printer → Printer properties → Ports tab. If the existing port shows the old address, add a new Standard TCP/IP Port with the correct one and select it.

Alternatively, remove the printer entirely and add it again — Windows discovers the current address itself, which is quicker if the Ports dialog is unfamiliar.

When an update broke it

Windows feature updates replace print drivers and occasionally reset ports. Microsoft has also been moving steadily towards a universal print class driver and away from manufacturer drivers, which breaks some older configurations.

The clean approach is to remove and re-add rather than reinstalling over the top:

  1. Settings → Printers & scanners → your printer → Remove.
  2. In the same Printers & scanners page, open Print server properties, go to the Drivers tab, and remove the old driver package too. Leaving it there means Windows reuses it.
  3. Restart.
  4. Add device and let Windows discover the printer on the network.

If discovery does not find it, choose the option to add manually and enter the printer’s IP address. That path is labelled along the lines of adding a printer by TCP/IP address or hostname.

For a recent network printer, let Windows use its own class driver. For an older model, or if you need the scanner, get the driver from the manufacturer’s support page for the exact model number rather than from a driver aggregator site.

Wi-Fi printers specifically

Printers have weaker radios than laptops and sit on the edge of coverage more often than people realise. A few recurring traps:

  • 2.4GHz only. Many printers cannot see a 5GHz network at all. If your router broadcasts both bands under one name, that usually works; if the bands have separate names, the printer must be on the 2.4GHz one, and so must the PC for some discovery methods.
  • Guest networks and client isolation. A printer on a guest network is deliberately unreachable from the main one. Some routers also enable AP isolation on the main network, which blocks device-to-device traffic entirely.
  • Deep sleep. Printers sleep aggressively to save power and some take 20–30 seconds to rejoin the network on waking, by which time Windows has given up and marked them offline. Most have a sleep timer setting worth lengthening.
  • Mesh networks. A printer that roams between mesh nodes can briefly lose its connection. Pinning its address helps; so does placing it within clear range of one node.

If the printer drops off alongside other devices, the problem is the network rather than the printer, and Wi-Fi that keeps disconnecting is the better starting point.

What does not help

  • Reinstalling the driver repeatedly without removing the old package. The old one gets reused and nothing changes.
  • Printer manufacturer “doctor” utilities as a first step. They mostly restart the spooler and re-run discovery, which you can do directly.
  • Setting the printer as default again. It has no bearing on reachability.
  • Buying a new USB cable for a network printer. Different connection entirely.
  • Disabling the firewall permanently. Worth a brief test to rule it out, never worth leaving off.

Realistic expectations

Clearing the queue and power-cycling the printer fixes it immediately in most cases, and that is where to start every time.

If it comes back within days, the address is moving, and setting a reservation on the router is a five-minute job that ends the problem for good. People spend months restarting printers rather than doing it once.

The honest limit is old hardware. A printer from before roughly 2015 with no current driver for Windows 11 may never work reliably again, because Microsoft has deprecated the third-party print driver model it depends on. A cheap print server or a USB connection to a machine that stays on are the remaining options, and neither is elegant.

Frequently asked questions

Why does the printer go offline every few days?
Almost always because its IP address changed. The router hands out addresses on a lease, and when the lease expires or the router restarts, the printer can get a different one while Windows keeps sending jobs to the old one. A static address or a DHCP reservation stops it permanently.
What does "Use Printer Offline" actually do?
It is a manual setting that tells Windows to queue jobs without attempting to send them. It can be switched on accidentally, and it sometimes sticks after a genuine connection failure. The option lives in the print queue window's Printer menu and simply needs unticking.
Should I restart the Print Spooler service?
It is a reasonable step when jobs will not cancel, because a corrupt job can wedge the spooler. Restarting it clears the queue for every printer on the machine, so make sure nothing important is waiting first.
Does a printer need the manufacturer's driver on Windows 11?
Increasingly not. Windows 11 uses a universal print class driver for most modern network printers, and Microsoft is moving away from manufacturer drivers entirely. A manufacturer driver is still needed for scanning features and for some older models.
Why can my phone print but my PC cannot?
Because the phone usually discovers the printer fresh each time over mDNS or AirPrint, while Windows holds a stored port pointing at a specific address. If the printer moved, the phone follows it and Windows does not, which is the clearest sign the address is the problem.

All Windows guides